DC Control unit for swing gates, sliding gates and roll up doors




DC Control unit for swing gates, sliding gates and roll up doors programmable using a display with a scroll menu and error reporting.

The Tecno Automazione DC control unit controls 24V motor-driven gates in direct current. Thanks to the smart charger function, the two 12-Volt Recovery batteries allow multiple commands in case of power failure. The high efficiency electronic circuits with which it has been designed enable a high number of actuations without any thermal problem allowing significant energy savings.

Features:

Input power supply 230 V - AC
Output power supply 24 V - DC
Power steering up to 270 W under power grid and in Recovery (power failure)
Max current 10 A
Recovery batteries 2 x 12 V min 7,5 Ah

Possible accessories:

Photovoltaic panel
Field irrigation unit module
electric-lock module
Courtesy light
Data back-up module

Functions:

Digital regulation of the leaves delay: it's possible to digitally set the delay between the leaves.
Obstacle detection sensor: anti-crushing during normal and slowed down opening and closing.
Pedestrian opening: a single leaf opening allows the pedestrian or motorcycle transit only.
Electronic limit switch: optimization of the leaves stroke by electronic detection of the end of stroke.
Cold winter function: preventing ice formation on the motor it ensures proper functioning in any climatic condition.
Digital regulation of the forces: it's possible to digitally set the pushing forces for both leaves during normal and slowed down motion.
Digital regulation of the operating times: it's possible to digitally set the operating times for both leaves during normal and slowed down motion.
Software management of the external inputs: it's possible to enable and disable the inputs of the control unit without having to touch the terminal block.

AUTOMATIC PROGRAMMING: Simply by pressing the transmitter's button the automatic programming procedure allows the user to program the gate's working phases without any further action.

SEQUENTIAL PROGRAMMING: The sequential programming procedure allows the user to program all gate's working phases using a transmitter in a sequential mode. Each time the transmitter's button is pressed the gate will start a working phase.

Smart charger with charging equalization:

The control unit charges the batteries irrespective of the charging state in which they are bringing them to a 100% level allowing maximum efficiency and reliability even in case of power failure.
Charger 1 charges the battery 1 bringing it to a 100% level irrespective of the charging state of battery 2.
Charger 2 charges the battery 2 bringing it to a 100% level irrespective of the charging state of battery 1.